fix(iace): MachineTypes-Filter auf 136 branchenspezifische Patterns

Medizin (25), Laser-Medizin (15), Aufzuege (25), Lebensmittel (20),
Bau (20), Forst/Foerderband (31) — alle Patterns feuern jetzt NUR
wenn der Maschinentyp passt. Verhindert Infusionspumpen-Szenarien
bei einem Cobot-Projekt.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

ai-compliance-sdk/internal/iace/hazard_patterns_construction.go

@@ -10,6 +10,7 @@ func GetConstructionPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP400", NameDE: "Umkippen Bagger bei Grabungsarbeiten", NameEN: "Excavator tipping during digging",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -25,6 +26,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP401", NameDE: "Verschuettung — Grabenrand bricht ein", NameEN: "Burial — trench wall collapses",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"structural_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -40,6 +42,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP402", NameDE: "Quetschen zwischen Baggerarm und Fahrerkabine", NameEN: "Crushing between excavator arm and cab",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -55,6 +58,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP403", NameDE: "Ueberfahren von Personen durch Radlader", NameEN: "Running over persons by wheel loader",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"moving_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -74,6 +78,7 @@ func GetConstructionPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP404", NameDE: "Absturz von Betonpumpenausleger", NameEN: "Collapse of concrete pump boom",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -91,6 +96,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP405", NameDE: "Druckversagen Betonpumpe", NameEN: "Pressure failure of concrete pump",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "high_pressure"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"pneumatic_hydraulic"},
@@ -106,6 +112,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP406", NameDE: "Heisser Asphalt — Verbrennungsgefahr", NameEN: "Hot asphalt — burn hazard",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"high_temperature", "chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"thermal_hazard"},
@@ -125,6 +132,7 @@ func GetConstructionPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP407", NameDE: "Herabfallen von Tunneldecke (Vortrieb)", NameEN: "Tunnel roof collapse during boring",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"structural_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -140,6 +148,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP408", NameDE: "Quetschen bei Ramme/Bohrgeraet", NameEN: "Crushing at pile driver/drilling rig",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -155,6 +164,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP409", NameDE: "Steinschlag bei Tunnelvortrieb", NameEN: "Rockfall during tunnel excavation",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"gravity_risk"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -174,6 +184,7 @@ func GetConstructionPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP410", NameDE: "Walze ueberrollt Person (Strassenbau)", NameEN: "Road roller runs over person",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"moving_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -189,6 +200,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP411", NameDE: "Laerm und Vibration bei Rammarbeiten", NameEN: "Noise and vibration during pile driving",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"vibration_source"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"ergonomic"},
@@ -208,6 +220,7 @@ func GetConstructionPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP412", NameDE: "Kippen von Mobilkran bei Ueberreichweite", NameEN: "Mobile crane tipping at over-reach",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -225,6 +238,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP413", NameDE: "Seilbruch am Kran", NameEN: "Crane wire rope failure",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"gravity_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -242,6 +256,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP414", NameDE: "Pendelnde Last trifft Person", NameEN: "Swinging load strikes person",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"gravity_risk", "moving_part"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -257,6 +272,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP415", NameDE: "Kollision zweier Krane", NameEN: "Collision of two cranes in overlapping work areas",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"moving_part", "structural_part"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -276,6 +292,7 @@ func GetConstructionPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP416", NameDE: "Absturz Hubarbeitsbuehne bei Wind", NameEN: "Aerial work platform overturning in wind",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"hydraulic_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -291,6 +308,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP417", NameDE: "Quetschen beim Containerumschlag", NameEN: "Crushing during container handling",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"moving_part", "crush_point", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -306,6 +324,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP418", NameDE: "Herabfallen Fassadengeruest", NameEN: "Facade scaffolding collapse",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"structural_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -321,6 +340,7 @@ func GetConstructionPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP419", NameDE: "Absturz von Fahrtreppen bei Stufe-Ketten-Bruch", NameEN: "Escalator fall due to step chain failure",
+			MachineTypes: []string{"construction", "crane", "excavator"},
 			RequiredComponentTags: []string{"moving_part", "structural_part"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},

ai-compliance-sdk/internal/iace/hazard_patterns_elevator.go

@@ -10,6 +10,7 @@ func GetElevatorPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP174", NameDE: "Einschluss in Schachtgrube", NameEN: "Entrapment in pit",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"gravity_risk", "structural_part", "elevator_shaft"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -25,6 +26,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP175", NameDE: "Quetschen im Tuerspalt", NameEN: "Crushing in door gap",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_door", "pinch_point", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -40,6 +42,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP176", NameDE: "Absturzgefahr bei offenem Schacht", NameEN: "Fall hazard at open shaft",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_shaft", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			ExcludedComponentTags: []string{"safety_device"},
@@ -56,6 +59,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP177", NameDE: "Pufferversagen — Aufprall in Endlage", NameEN: "Buffer failure — impact at terminal",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_shaft", "gravity_risk", "structural_part"},
 			RequiredEnergyTags:    []string{"stored_energy"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -73,6 +77,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP178", NameDE: "Seilriss / Treibscheibenversagen", NameEN: "Rope break / traction sheave failure",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -90,6 +95,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP179", NameDE: "Uebergeschwindigkeit des Fahrkorbs", NameEN: "Car overspeed",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "safety_function_failure"},
@@ -107,6 +113,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP180", NameDE: "Fehlende Notrufeinrichtung", NameEN: "Missing emergency call device",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			ExcludedComponentTags: []string{"emergency_comm"},
@@ -123,6 +130,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP181", NameDE: "Brandfalle im Aufzugsschacht", NameEN: "Fire trap in elevator shaft",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_shaft", "structural_part"},
 			RequiredEnergyTags:    []string{"thermal"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "material_environmental"},
@@ -138,6 +146,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP182", NameDE: "Quetschen zwischen Fahrkorb und Gegengewicht", NameEN: "Crushing between car and counterweight",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "counterweight", "pinch_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -153,6 +162,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP183", NameDE: "Elektrischer Schlag im Triebwerksraum", NameEN: "Electric shock in machine room",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "electrical_part"},
 			RequiredEnergyTags:    []string{"electrical"},
 			GeneratedHazardCats:   []string{"electrical_hazard"},
@@ -168,6 +178,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP184", NameDE: "Hydraulikversagen bei hydraulischem Aufzug", NameEN: "Hydraulic failure in hydraulic lift",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"hydraulic_part", "elevator_car", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "pneumatic_hydraulic"},
@@ -183,6 +194,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP185", NameDE: "Scherenstelle Fahrkorb / Schachtwand", NameEN: "Shearing between car and shaft wall",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "shear_risk", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -198,6 +210,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP186", NameDE: "NOT-Befreiung durch Laien", NameEN: "Emergency rescue by untrained persons",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "safety_function_failure"},
@@ -213,6 +226,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP187", NameDE: "Einklemmung im Tuermechanismus", NameEN: "Trapping in door mechanism",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_door", "pinch_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -228,6 +242,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP188", NameDE: "Ueberlast — Seilspannungsgrenze ueberschritten", NameEN: "Overload — rope tension limit exceeded",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "safety_function_failure"},
@@ -245,6 +260,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP189", NameDE: "Fahrkorb-Niveauversatz an Haltestelle", NameEN: "Car leveling offset at landing",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -260,6 +276,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP190", NameDE: "Quetschgefahr auf Fahrkorbdach", NameEN: "Crushing hazard on car roof",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "pinch_point", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -275,6 +292,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP191", NameDE: "Unbeabsichtigte Fahrkorbewegung bei offener Tuer", NameEN: "Unintended car movement with door open",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_door", "elevator_traction", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "safety_function_failure"},
@@ -292,6 +310,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP192", NameDE: "Vandalismus an Aufzugssteuerung", NameEN: "Vandalism on elevator controls",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "programmable"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"safety_function_failure"},
@@ -307,6 +326,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP193", NameDE: "Seismische Belastung Aufzugsanlage", NameEN: "Seismic load on elevator system",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_shaft", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -322,6 +342,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP194", NameDE: "Fangvorrichtung klemmt nicht", NameEN: "Safety gear does not engage",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"safety_function_failure", "mechanical_hazard"},
@@ -339,6 +360,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP195", NameDE: "Laermexposition Triebwerksraum", NameEN: "Noise exposure in machine room",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_traction", "noise_source"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"noise_vibration"},
@@ -354,6 +376,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP196", NameDE: "Absturz in Schacht bei Fahrkorbdach-Arbeiten", NameEN: "Fall into shaft during car-top work",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_car", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -369,6 +392,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP197", NameDE: "Vergiftung durch Oel/Schmierstoffe im Schacht", NameEN: "Intoxication from oil/lubricants in shaft",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_shaft", "chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -384,6 +408,7 @@ func GetElevatorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP198", NameDE: "Tuerschliessdruck zu hoch", NameEN: "Door closing force too high",
+			MachineTypes: []string{"elevator", "lift", "escalator"},
 			RequiredComponentTags: []string{"elevator_door", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},

ai-compliance-sdk/internal/iace/hazard_patterns_food_pkg.go

@@ -6,6 +6,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 	return []HazardPattern{
 		{
 			ID: "HP300", NameDE: "Einzug in Fleischwolf", NameEN: "Draw-in at meat grinder",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"rotating_part", "cutting_part"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -21,6 +22,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP301", NameDE: "Verbrennungsgefahr am Backofen/Kochkessel", NameEN: "Burn hazard at oven/cooking kettle",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"high_temperature", "structural_part"},
 			RequiredEnergyTags:    []string{"thermal"},
 			GeneratedHazardCats:   []string{"thermal_hazard"},
@@ -36,6 +38,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP302", NameDE: "Kontamination durch mangelnde Hygiene", NameEN: "Contamination due to insufficient hygiene",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -51,6 +54,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP303", NameDE: "Schneidverletzung an Aufschnittmaschine", NameEN: "Cut injury at slicing machine",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"cutting_part", "rotating_part"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -66,6 +70,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP304", NameDE: "Dampfverbrennung beim Oeffnen des Druckkessels", NameEN: "Steam burn when opening pressure vessel",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"high_pressure", "high_temperature"},
 			RequiredEnergyTags:    []string{"thermal", "stored_energy"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "pneumatic_hydraulic"},
@@ -84,6 +89,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP305", NameDE: "Quetschen in Teigknetmaschine", NameEN: "Crushing in dough kneading machine",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"rotating_part", "crush_point", "high_force"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -99,6 +105,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP306", NameDE: "Einzug in Walzenmuehle", NameEN: "Draw-in at roller mill",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"rotating_part", "entanglement_risk", "high_force"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -114,6 +121,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP307", NameDE: "Elektrischer Schlag in Nassumgebung (IP-Schutz)", NameEN: "Electric shock in wet environment (IP rating)",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"electrical_part"},
 			RequiredEnergyTags:    []string{"electrical_energy"},
 			GeneratedHazardCats:   []string{"electrical_hazard"},
@@ -132,6 +140,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP308", NameDE: "Allergene Kreuzkontamination", NameEN: "Allergen cross-contamination",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part", "chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -147,6 +156,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP309", NameDE: "Biologische Gefaehrdung (Bakterien, Schimmel)", NameEN: "Biological hazard (bacteria, mold)",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -162,6 +172,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP310", NameDE: "Quetschen durch Abfuellstempel", NameEN: "Crushing by filling piston",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"crush_point", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -177,6 +188,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP311", NameDE: "Sturz auf nassem/fettigem Boden", NameEN: "Slip on wet/greasy floor",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "ergonomic"},
@@ -192,6 +204,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP312", NameDE: "Erstickungsgefahr in Gaerbehaelter/Silo", NameEN: "Asphyxiation in fermentation vessel/silo",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -207,6 +220,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP313", NameDE: "Veraetzung durch Reinigungsmittel (CIP)", NameEN: "Chemical burn from CIP cleaning agents",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -222,6 +236,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP314", NameDE: "Laerm durch Hochdruckreinigung", NameEN: "Noise from high-pressure cleaning",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"noise_source", "high_pressure"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"noise_vibration"},
@@ -237,6 +252,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP315", NameDE: "Verbrennungsgefahr an Fritteuse/Heissoelbad", NameEN: "Burn hazard at deep fryer/hot oil bath",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"high_temperature"},
 			RequiredEnergyTags:    []string{"thermal"},
 			GeneratedHazardCats:   []string{"thermal_hazard"},
@@ -252,6 +268,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP316", NameDE: "Schnitt beim manuellen Messerwechsel", NameEN: "Cut during manual blade change",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"cutting_part"},
 			RequiredEnergyTags:    []string{},
 			ExcludedComponentTags: []string{"safety_device"},
@@ -268,6 +285,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP317", NameDE: "Explosion in Mehlstaubatmosphaere", NameEN: "Explosion in flour dust atmosphere",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -286,6 +304,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP318", NameDE: "Ergonomische Belastung bei manueller Portionierung", NameEN: "Ergonomic strain during manual portioning",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"ergonomic"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"ergonomic"},
@@ -301,6 +320,7 @@ func GetFoodProcessingPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP319", NameDE: "Kaelteverletzung im Tiefkuehlbereich", NameEN: "Cold injury in deep-freeze area",
+			MachineTypes: []string{"food_processing", "packaging"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"thermal_hazard", "ergonomic"},

ai-compliance-sdk/internal/iace/hazard_patterns_forestry_conveyor.go

@@ -10,6 +10,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP420", NameDE: "Rueckschlag Kettensaege", NameEN: "Chainsaw kickback",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"cutting_part", "vibration_source"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -25,6 +26,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP421", NameDE: "Herabfallender Ast/Baum trifft Person", NameEN: "Falling branch/tree strikes person",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"gravity_risk"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -40,6 +42,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP422", NameDE: "Einzug in Hacker/Haecksler", NameEN: "Entanglement in wood chipper/shredder",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"rotating_part", "cutting_part"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -55,6 +58,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP423", NameDE: "Schnitt durch rotierendes Maehwerk", NameEN: "Cut by rotating mower blade",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"rotating_part", "cutting_part"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -70,6 +74,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP424", NameDE: "Hand-Arm-Vibration bei Kettensaege (Dauerschaden)", NameEN: "Hand-arm vibration from chainsaw (chronic damage)",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"vibration_source"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"ergonomic"},
@@ -85,6 +90,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP425", NameDE: "Gehoerschaden bei Motorsaege", NameEN: "Hearing damage from chainsaw operation",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"vibration_source"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"ergonomic"},
@@ -100,6 +106,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP426", NameDE: "Umkippen des Forstschleppers", NameEN: "Forestry skidder overturning",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"moving_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -115,6 +122,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP427", NameDE: "Quetschen durch Holzgreifer", NameEN: "Crushing by log grapple",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"hydraulic_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -130,6 +138,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP428", NameDE: "Splitterflug bei Holzbearbeitung", NameEN: "Flying splinters during wood processing",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"cutting_part", "high_speed"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -145,6 +154,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP429", NameDE: "Vergiftung durch Abgase Zweitaktmotor", NameEN: "Poisoning by two-stroke engine exhaust",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -160,6 +170,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP430", NameDE: "Allergische Reaktion auf Pflanzenschutz", NameEN: "Allergic reaction to pesticide",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -179,6 +190,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		// ================================================================
 		{
 			ID: "HP431", NameDE: "Einzug an Bandumlenkung", NameEN: "Entanglement at belt conveyor deflection point",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"rotating_part", "entanglement_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -194,6 +206,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP432", NameDE: "Herabfallen von Stueckgut vom Foerderband", NameEN: "Falling unit load from conveyor belt",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"gravity_risk", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -209,6 +222,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP433", NameDE: "Quetschen zwischen Foerderband und Rahmen", NameEN: "Crushing between conveyor belt and frame",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"moving_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -224,6 +238,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP434", NameDE: "Materialstau mit ploetzlicher Freisetzung", NameEN: "Material blockage with sudden release",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"moving_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -239,6 +254,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP435", NameDE: "Staubexplosion in Schuettgutfoerderung (Silo)", NameEN: "Dust explosion in bulk material handling (silo)",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"chemical_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"fire_explosion"},
@@ -256,6 +272,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP436", NameDE: "Vergiftung in Silozelle (Gaerungsgase)", NameEN: "Poisoning in silo cell (fermentation gases)",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"chemical_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -271,6 +288,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP437", NameDE: "Einzug in Schneckenfoerderer", NameEN: "Entanglement in screw conveyor",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"rotating_part", "entanglement_risk"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -286,6 +304,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP438", NameDE: "Absturz von Rollenfoerderer (Erhoehung)", NameEN: "Fall from elevated roller conveyor",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"structural_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -301,6 +320,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP439", NameDE: "Quetschen durch Hubwerk/Scherenhubtisch", NameEN: "Crushing by lift table/scissor lift mechanism",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"hydraulic_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -316,6 +336,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP440", NameDE: "Einklemmen am Drehteller", NameEN: "Trapping at rotary turntable",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"rotating_part", "crush_point"},
 			RequiredEnergyTags:    []string{"rotational"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -331,6 +352,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP441", NameDE: "Kollision FTS mit Foerderanlage", NameEN: "AGV collision with conveyor system",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"moving_part"},
 			RequiredEnergyTags:    []string{"kinetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -346,6 +368,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP442", NameDE: "Herabfallen von Paletten-Stapel", NameEN: "Pallet stack collapse",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"gravity_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -361,6 +384,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP443", NameDE: "Quetschen an Verladebruecke", NameEN: "Crushing at loading dock leveler",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"hydraulic_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -376,6 +400,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP444", NameDE: "Ladebuehne senkt sich unkontrolliert", NameEN: "Loading dock platform drops uncontrolled",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"hydraulic_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -391,6 +416,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP445", NameDE: "Quetschen durch Industrietor", NameEN: "Crushing by industrial door",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"moving_part", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -406,6 +432,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP446", NameDE: "Einzug in Rolltor", NameEN: "Entanglement in roller shutter door",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"moving_part", "entanglement_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -421,6 +448,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP447", NameDE: "Absturz durch offene Schachtgrube", NameEN: "Fall through open shaft pit",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"structural_part", "gravity_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -436,6 +464,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP448", NameDE: "Stolpern ueber Schienen von Verschiebeanlage", NameEN: "Tripping over rails of transfer system",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -451,6 +480,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP449", NameDE: "Brand in Absauganlage (Holzstaub)", NameEN: "Fire in extraction system (wood dust)",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"chemical_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"fire_explosion"},
@@ -468,6 +498,7 @@ func GetForestryConveyorPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP450", NameDE: "Explosion in Mehlsilo", NameEN: "Explosion in flour silo",
+			MachineTypes: []string{"forestry", "conveyor"},
 			RequiredComponentTags: []string{"chemical_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"fire_explosion"},

ai-compliance-sdk/internal/iace/hazard_patterns_laser_medical.go

@@ -5,6 +5,7 @@ func GetLaserPatterns() []HazardPattern {
 	return []HazardPattern{
 		{
 			ID: "HP335", NameDE: "Augenverletzung durch Laserstrahlung (Klasse 3B/4)", NameEN: "Eye injury from laser radiation (Class 3B/4)",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -23,6 +24,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP336", NameDE: "Hautverbrennung durch Laserstrahl", NameEN: "Skin burn from laser beam",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"thermal_hazard"},
@@ -38,6 +40,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP337", NameDE: "Brand durch Laserstrahl auf brennbarem Material", NameEN: "Fire from laser beam on combustible material",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk", "high_temperature"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "material_environmental"},
@@ -53,6 +56,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP338", NameDE: "Reflexion — Strahl trifft unkontrolliert Person", NameEN: "Reflection — beam hits person uncontrolled",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -68,6 +72,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP339", NameDE: "Rauchgas bei Laserschneiden (Metalldaempfe)", NameEN: "Fumes during laser cutting (metal vapors)",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk", "chemical_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -83,6 +88,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP340", NameDE: "Explosionsgefahr bei Laser + brennbare Atmosphaere", NameEN: "Explosion hazard laser + combustible atmosphere",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -101,6 +107,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP341", NameDE: "Quetschen durch CNC-Achsen der Laseranlage", NameEN: "Crushing by CNC axes of laser system",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"moving_part", "high_force", "crush_point"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -116,6 +123,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP342", NameDE: "Blendung durch Streulicht", NameEN: "Glare from stray light",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -131,6 +139,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP343", NameDE: "Elektroschock an Laserquelle (Hochspannung)", NameEN: "Electric shock at laser source (high voltage)",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"electrical_part", "high_voltage"},
 			RequiredEnergyTags:    []string{"electrical_energy"},
 			GeneratedHazardCats:   []string{"electrical_hazard"},
@@ -149,6 +158,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP344", NameDE: "UV-Strahlung bei bestimmten Lasertypen", NameEN: "UV radiation from certain laser types",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -164,6 +174,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP345", NameDE: "Schutzgaserstickung in Laserkabine", NameEN: "Inert gas asphyxiation in laser cabin",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"structural_part", "chemical_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -179,6 +190,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP346", NameDE: "Fokussierlinsenverschmutzung verursacht Rueckreflex", NameEN: "Focusing lens contamination causes back-reflection",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "material_environmental"},
@@ -194,6 +206,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP347", NameDE: "Laserstrahl-Austritt bei defekter Einhausung", NameEN: "Laser beam escape from defective enclosure",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk", "interlocked"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental", "safety_function_failure"},
@@ -209,6 +222,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP348", NameDE: "Laermbelastung durch Laserschneidprozess", NameEN: "Noise exposure from laser cutting process",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"noise_source", "radiation_risk"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"noise_vibration"},
@@ -224,6 +238,7 @@ func GetLaserPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP349", NameDE: "Restenergie in Lasermedium nach Abschaltung", NameEN: "Residual energy in laser medium after shutdown",
+			MachineTypes: []string{"medical_device", "laser_device"},
 			RequiredComponentTags: []string{"radiation_risk", "stored_energy"},
 			RequiredEnergyTags:    []string{"stored_energy"},
 			GeneratedHazardCats:   []string{"electrical_hazard", "material_environmental"},

ai-compliance-sdk/internal/iace/hazard_patterns_medical_pressure.go

@@ -6,6 +6,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 	return []HazardPattern{
 		{
 			ID: "HP350", NameDE: "Elektrischer Schlag am Patienten (Ableitstrom)", NameEN: "Electric shock to patient (leakage current)",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"electrical_part"},
 			RequiredEnergyTags:    []string{"electrical_energy"},
 			GeneratedHazardCats:   []string{"electrical_hazard"},
@@ -24,6 +25,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP351", NameDE: "Fehlfunktion des Defibrillators", NameEN: "Defibrillator malfunction",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"electrical_part", "has_software"},
 			RequiredEnergyTags:    []string{"electrical_energy", "stored_energy"},
 			GeneratedHazardCats:   []string{"electrical_hazard", "safety_function_failure"},
@@ -42,6 +44,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP352", NameDE: "Ueberhitzung durch HF-Chirurgiegeraet", NameEN: "Overheating by HF surgical device",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"electrical_part", "high_temperature"},
 			RequiredEnergyTags:    []string{"electrical_energy", "thermal"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "electrical_hazard"},
@@ -57,6 +60,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP353", NameDE: "Strahlenexposition am CT-Scanner", NameEN: "Radiation exposure at CT scanner",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"radiation_risk"},
 			RequiredEnergyTags:    []string{"radiation"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -75,6 +79,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP354", NameDE: "Fehlalarm fuehrt zu falscher Behandlung", NameEN: "False alarm leads to wrong treatment",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"sensor_part", "has_software"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"sensor_fault", "software_fault"},
@@ -90,6 +95,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP355", NameDE: "Infektionsgefahr durch mangelhafte Sterilisation", NameEN: "Infection risk from insufficient sterilization",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -105,6 +111,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP356", NameDE: "Mechanisches Versagen des OP-Tischs", NameEN: "Mechanical failure of operating table",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"moving_part", "hydraulic_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -120,6 +127,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP357", NameDE: "EMV-Stoerung anderer Geraete", NameEN: "EMC interference with other devices",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"electrical_part", "networked"},
 			RequiredEnergyTags:    []string{"electromagnetic"},
 			GeneratedHazardCats:   []string{"emc_hazard", "safety_function_failure"},
@@ -135,6 +143,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP358", NameDE: "Softwarefehler in Dosierungssystem", NameEN: "Software error in dosing system",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"has_software", "programmable"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"software_fault", "safety_function_failure"},
@@ -153,6 +162,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP359", NameDE: "Patientenfall vom Krankenbett", NameEN: "Patient fall from hospital bed",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"gravity_risk", "moving_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"mechanical_hazard"},
@@ -168,6 +178,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP360", NameDE: "Ueberhitzung tragbarer Geraetebatterie", NameEN: "Overheating of portable device battery",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"electrical_part"},
 			RequiredEnergyTags:    []string{"stored_energy", "thermal"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "electrical_hazard"},
@@ -183,6 +194,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP361", NameDE: "Fehlerhafte Anzeige am Patientenmonitor", NameEN: "Erroneous display on patient monitor",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"user_interface", "has_software"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"hmi_error", "software_fault"},
@@ -198,6 +210,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP362", NameDE: "Bewegungseinschraenkung in MRT-Roehre", NameEN: "Movement restriction in MRI bore",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{"electromagnetic"},
 			GeneratedHazardCats:   []string{"ergonomic", "material_environmental"},
@@ -213,6 +226,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP363", NameDE: "Ferromagnetischer Gegenstand als MRT-Projektil", NameEN: "Ferromagnetic object as MRI projectile",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{"electromagnetic"},
 			GeneratedHazardCats:   []string{"mechanical_hazard", "material_environmental"},
@@ -228,6 +242,7 @@ func GetMedicalDevicePatterns() []HazardPattern {
 		},
 		{
 			ID: "HP364", NameDE: "Quenchgefahr bei supraleitendem MRT-Magnet", NameEN: "Quench hazard at superconducting MRI magnet",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"structural_part"},
 			RequiredEnergyTags:    []string{"electromagnetic", "stored_energy"},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -250,6 +265,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 	return []HazardPattern{
 		{
 			ID: "HP365", NameDE: "Bersten eines Druckbehaelters", NameEN: "Bursting of a pressure vessel",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure", "structural_part"},
 			RequiredEnergyTags:    []string{"stored_energy"},
 			GeneratedHazardCats:   []string{"pneumatic_hydraulic"},
@@ -268,6 +284,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP366", NameDE: "Dampfaustritt an undichter Flanschverbindung", NameEN: "Steam leak at flanged joint",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure", "high_temperature"},
 			RequiredEnergyTags:    []string{"thermal", "stored_energy"},
 			GeneratedHazardCats:   []string{"thermal_hazard", "pneumatic_hydraulic"},
@@ -283,6 +300,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP367", NameDE: "Sicherheitsventil oeffnet nicht", NameEN: "Safety valve fails to open",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure"},
 			RequiredEnergyTags:    []string{"stored_energy"},
 			GeneratedHazardCats:   []string{"safety_function_failure", "pneumatic_hydraulic"},
@@ -301,6 +319,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP368", NameDE: "Druckstoss (Wasserschlag) in Rohrleitung", NameEN: "Pressure surge (water hammer) in pipeline",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure"},
 			RequiredEnergyTags:    []string{"stored_energy"},
 			GeneratedHazardCats:   []string{"pneumatic_hydraulic", "mechanical_hazard"},
@@ -316,6 +335,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP369", NameDE: "Korrosionsversagen unter Isolierung", NameEN: "Corrosion under insulation failure",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental", "pneumatic_hydraulic"},
@@ -331,6 +351,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP370", NameDE: "Verbrennungsgefahr an heisser Dampfleitung", NameEN: "Burn hazard at hot steam pipe",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_temperature", "structural_part"},
 			RequiredEnergyTags:    []string{"thermal"},
 			GeneratedHazardCats:   []string{"thermal_hazard"},
@@ -346,6 +367,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP371", NameDE: "Erstickungsgefahr durch Inertgas-Austritt", NameEN: "Asphyxiation from inert gas release",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"chemical_risk", "structural_part"},
 			RequiredEnergyTags:    []string{},
 			GeneratedHazardCats:   []string{"material_environmental"},
@@ -361,6 +383,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP372", NameDE: "Ueberdruckversagen Waermetauscher", NameEN: "Overpressure failure of heat exchanger",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure", "high_temperature"},
 			RequiredEnergyTags:    []string{"thermal", "stored_energy"},
 			GeneratedHazardCats:   []string{"pneumatic_hydraulic", "thermal_hazard"},
@@ -379,6 +402,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP373", NameDE: "Druckluft-Hautinjektion", NameEN: "Compressed air skin injection",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"pneumatic_part", "high_pressure"},
 			RequiredEnergyTags:    []string{"pneumatic_pressure"},
 			GeneratedHazardCats:   []string{"pneumatic_hydraulic"},
@@ -394,6 +418,7 @@ func GetPressureEquipmentPatterns() []HazardPattern {
 		},
 		{
 			ID: "HP374", NameDE: "Schnellschluss-Ventilversagen bei Druckentlastung", NameEN: "Fast-closing valve failure during pressure relief",
+			MachineTypes: []string{"medical_device", "infusion_pump", "ventilator", "patient_monitor"},
 			RequiredComponentTags: []string{"high_pressure", "actuator_part"},
 			RequiredEnergyTags:    []string{"stored_energy"},
 			GeneratedHazardCats:   []string{"safety_function_failure", "pneumatic_hydraulic"},